Felix printers Tec 4 User Manual page 21

Material Data Safety Sheet User Manual
20
18 December 2017
present use a/an Particulate filter, type P2. When combinations of vapors, acids, or dusts/mists are present use a/an Organic vapor cartridge with a
particulate pre-filter, type AP2.
Ingestion: Use good personal hygiene. Do not consume or store food in the work area. Wash hands before smoking or eating.
Engineering Controls
Ventilation: Good general ventilation should be sufficient for most conditions. Local exhaust ventilation may be necessary for some operations
Toxicological Information
Acute Toxicity
Ingestion
Very low toxicity if swallowed. Harmful effects not anticipated from swallowing small amounts. May cause choking if swallowed.
Estimated LD50, Rat > 5,000 mg/kg
Eye Contact
Solid or dust may cause irritation or corneal injury due to mechanical action. Elevated temperatures may generate vapor levels sufficient to cause
eye irritation. Effects may include discomfort and redness.
Skin Contact
Essentially nonirritating to skin. Mechanical injury only. Under normal processing conditions, material is heated to elevated temperatures; contact
with the material may cause thermal burns.
Skin Absorption
No adverse effects anticipated by skin absorption. Estimated LD50, Rabbit > 2,000 mg/kg
Inhalation
No adverse effects are anticipated from single exposure to dust. Vapors/fumes released during thermal processing may cause respiratory irritation.
Repeated Dose Toxicity
Additives are encapsulated in the product and are not expected to be released under normal processing conditions or foreseeable emergency.
Ecological Information
CHEMICAL FATE
Movement & Partitioning
No bioconcentration of the polymeric component is expected because of its high molecular weight. In the terrestrial environment, material is
expected to remain in the soil. In the aquatic environment, material will sink and remain in the sediment.
Persistence and Degradability
This water-insoluble polymeric solid is expected to be inert in the environment. Surface photo degradation is expected with exposure to sunlight. No
appreciable biodegradation is expected.
ECOTOXICITY
Not expected to be acutely toxic, but material in pellet or bead form may mechanically cause adverse effects if ingested by waterfowl or aquatic life.
Disposal Considerations
For uncontaminated material the disposal options include mechanical and chemical recycling or energy recovery. In some countries landfill is also
allowed. For contaminated material the options remain the same, although additional evaluation is required. For all countries the disposal methods
must be in compliance with national and provincial laws and any municipal or local by-laws. All disposal methods must be in compliance with the EU
framework Directives 91/156/EEC, 91/689/EEC and their subsequent adaptations, as implemented in National Laws and Regulations, as well as EU
Directives dealing with priority waste streams. Transboundary shipment of wastes must be in compliance with EU Regulation 259/93 and
subsequent modifications.
www.FELIXprinters.com
FELIX Tec 4