Access Control - TP-Link Archer C50 User Manual

Chapter 4
Then you will see the page as shown in figure below.

4. 12. Access Control

Access Control is used to deny or allow specific client devices to access your network
with access time and content restrictions.
I want to:
How
can I do
that?
Deny or allow specific client devices to access my network with
access tiem and content restrictions.
For example, If you want to restrict the internet activities of host
with MAC address 00-11-22-33-44-AA on the LAN to access
www.tp-link.com only, please follow the steps below:
1. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
2. Go to Access Control
1 ) Click Add New.
2 ) Select MAC Address
description (e.g. host_1) for the host in the
field and enter 00-11-22-33-44-AA in the
filed.
Configure the Router in Wireless Router Mode
> Host and configure the host settings:
as the mode type. Create a unique
Description
MAC Address
47