Lan; Iptv - TP-Link Archer C50 User Manual

Chapter 4
• Connection Mode
• Always On - In this mode, the internet connection will be active all the time.
• Connect on Demand
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the internet again. If you want to keep
your internet connection active all the time, please enter 0 in the
field. Otherwise, enter the number of minutes you want to have elapsed before
your internet access disconnects.
• Connect Manually
immediately. This mode also supports the
on Demand
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the internet again.
4. 4. 2.

LAN

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Network > LAN.
3. Configure the IP parameters of the LAN and click Save.
• MAC Address - The physical address of the LAN ports. The value can not be changed.
• IP Address - Enter the IP address in dotted-decimal notation of your router.
• Subnet Mask - An address code that determines the size of the network. Normally
255.255.255.0 is used as the subnet mask.
Note:
• If you have changed the IP address, you must use the new IP address to log in.
• If the new IP address you set is not in the same subnet as the old one, the IP address pool in the DHCP
Server will be configured automatically, but the Virtual Server and DMZ Host will not take effect until they
are re-configured.
4. 4. 3.

IPTV

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
- In this mode, the internet connection can be terminated
- You can click
mode. The internet connection can be disconnected automatically
Configure the Router in Wireless Router Mode
Connect/Disconnect
Max Idle Time
Max Idle Time
to connect/disconnect
function as Connect
22