TP-Link Archer C50 User Manual page 66

Chapter 4
MTU. But this is rarely required, and should not be done unless you are sure it is
necessary for your ISP connection.
• Enable MLD Proxy
function if you need.
PPPoEv6
• PPP Username/Password
your ISP. These fields are case-sensitive.
• Authentication Type
CHAP and MS-CHAP.
• Addressing Type
SLAAC (Stateless address auto-configuration) and DHCPv6 (Dynamic Host
Configuration Protocol for IPv6) Server.
• MTU(Bytes)
Ethernet networks is 1500 Bytes. For some ISPs, you may need to modify the
MTU. But this is rarely required, and should not be done unless you are sure it is
necessary for your ISP connection.
• Enable MLD Proxy
function if you need.
• Use IPv6 address specified by ISP
• Set IPv6 DNS Server manually
and secondary IPv6 DNS server.
- Enable the Multicast Listener Discovery (MLD) Proxy
- Enter the user name and password provided by
– Choose one authentication type from AUTO-AUTH, PAP,
- There are two types of assignation for IPv6 address:
- The normal MTU (Maximum Transmission Unit) value for most
- Enable the Multicast Listener Discovery (MLD) Proxy
- Enter the IP address of the IPv6 DNS server
Configure the Router in Wireless Router Mode
- Input a static IPv6 address from the ISP.
61