Chapter 5
•
Wireless Radio
enabled or disabled.
•
Name(SSID)
•
Mode
- The current wireless mode which the router works on.
•
Channel
- The current wireless channel in use.
•
Channel Width
•
MAC Address
•
System Up Time
- The length of the time since the router was last powered on or
reset.
Click
Refresh
to get the latest status and settings of the router.
5. 2.
Quick Setup
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
Quick
Setup.
3. Click
Next
to start. Then follow the step-by-step instructions to connect your router
to the internet.
5. 3.
Operation Mode
The router supports two operation modes: Wireless Router mode and Access Point
mode.
5. 3. 1.
Wireless Router Mode
The default Wireless Router mode is required most commonly. In this mode, the device
enables multiple users to share the internet connection via ADSL/Cable Modem.
For hardware connection, refer to
- Indicates whether the wireless radio feature of the Router is
- The SSID of the Router.
- The current wireless channel width in use.
- The physical address of the router.
Connect Your
Configure the Router in Access Point Mode
Router.
74