Wireless Mac Filtering - TP-Link Archer C50 User Manual

Chapter 5
• Apply To - Select the day or days you need the wireless off.
• Start Time, End Time
and End Time in the corresponding field.
• Add - Click to add your selected time to the below table.
• Clear Schedule - Click to clear your settings in the table.
5. 6. 5.

Wireless MAC Filtering

Wireless MAC Filtering is used to deny or allow specific wireless client devices to access
your network by their MAC addresses.
I want to:
How
can I do
that?
- You can select all day-24 hours or you may enter the
Deny or allow specific wireless client devices to access my
network by their MAC addresses.
For example, you want the wireless client A with the MAC
address 00:0A:EB:B0:00:0B and the wireless client B with the
MAC address 00:0A:EB:00:07:5F to access the router, but other
wireless clients cannot access the router
1. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
Configure the Router in Access Point Mode
Start Time
82