Dhcp; Dhcp Settings - TP-Link Archer C50 User Manual

Chapter 4
• To set up Facebook Wi-Fi, disable wireless security, enable Facebook Wi-Fi,
click Set Up on
Wi-Fi settings.
7. Click Save.
4. 8.

DHCP

By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the
router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices
from the IP Address Pool. You can change the settings of DHCP Server if necessary,
and you can reserve LAN IP addresses for specified client devices.
4. 8. 1.

DHCP Settings

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to DHCP > DHCP
3. Specify DHCP server settings and click Save.
• DHCP Server - Enable or disable the DHCP server. If disabled, you must have another
DHCP server within your network or else you must configure the computer manually.
• Start IP Address - Specify an IP address for the DHCP Server to start with when
assigning IP addresses.
Facebook, then follow the instructions to complete Facebook
Settings.
Configure the Router in Wireless Router Mode
35