TP-Link Archer C50 User Manual page 10

Chapter 1
The following parts (view from left to right) are located on the rear panel.
Item
Power Port
Power On/Off Button
Reset Button
Wi-Fi/WPS Button
Internet Port
Ethernet Ports (1/2/3/4)
Antennas
For connecting the router to a power socket via the provided power adapter.
Press this button to power on or off the router.
Press and hold this button for 2 seconds until all LEDs turn off to reset the router to
its factory default settings.
Press this button for 1 second, and immediately press the WPS button on your
device. The WPS LED of the router should change from flashing to solid on, indicating
successful WPS connection.
Press and hold this button for about 3 seconds to turn on or off the wireless function
of your router.
For connecting to a DSL/Cable modem, or an Ethernet port.
For connecting your PCs or other wired network devices to the router.
Used for wireless operation and data transmitting. Upright them for the best Wi-Fi
performance.
Get to Know About Your Router
Description
5