Cleaning The Module - Agilent Technologies G1329A User Manual

Cleaning the module

The module case should be kept clean. Cleaning should be done with a soft
cloth slightly dampened with water or a solution of water and mild detergent.
Do not use an excessively damp cloth as liquid may drip into the module.
Liquid dripping into the electronic compartment of your module.
WA R N I N G
Liquid in the module electronics can cause shock hazard and damage the module.
➔
Do not use an exessively damp cloth during cleaning.
➔
Drain all solvent lines before opening any fittings.
Introduction into Maintenance and Repair
7
Maintenance
79