Needle Assembly - Agilent Technologies G1329A User Manual

7
Maintenance
Simple Repairs

Needle Assembly

When When the needle is visibly damaged
When the needle is blocked
Tools required • ¼ inch wrench (supplied in accessory kit)
• 2.5 mm Hex key (supplied in accessory kit)
• A pair of pliers
Parts required #
1
1
1
1
Preparations • Select "Start" in the maintenance function "Change Needle".
• When the needle is positioned approx.15 mm above the needle seat, remove the front cover.
Personal injury
WA R N I N G
To avoid personal injury, keep fingers away from the needle area during autosampler
operation.
➔
86
Part number Description
G1313-87201 Needle assembly for G1313-87101 or G1313-87103 needle-seat
G1329-80001 Needle assembly for G1329-87101 or G1329-87103 needle seat
G1313-87202 Needle assembly (900 µl loop cap) for G1313-87101 needle seat
G2260-87201 Needle assembly (900 µl loop cap) for G2260-87101 needle-seat
Do not bend the safety flap away from its position, or attempt to insert or remove a
vial from the gripper when the gripper is positioned below the needle.