7
Maintenance
Simple Repairs
Rotor Seal
When
Poor injection-volume reproducibility
Leaking injection valve
Tools required
• 1/4 inch wrench (supplied in accessory kit).
• Hex key, 9/64 inch (supplied in accessory kit).
Parts required
#
1
1
1
1
Preparations
• Remove front cover.
• Remove the leak tubing (if necessary).
Removing the stator head
C A U T I O N
The stator face is held in place by the stator head. When you remove the stator head,
the stator face can fall out of the valve.
➔
There is no stator face for G1329B.
N O T E
94
Part number
Description
0100-1853
Rotor seal (Vespel) for G1329A
0100-1849
Rotor seal (Tefzel) for G1329A
0101-1416
Rotor seal (PEEK) for G1329B
0101-1268
Rotor seal (PEEK) for G2260A
Carefully handle the valve to prevent damage to the stator face