Table of Contents
Advertisement
Warning: To avoid potential equipment damage and personal injury, do not install
disk drives into the storage shelves before mounting them into the rack. The added
weight of the disk drives hinders the ability to safely install the storage shelves.
To install the storage shelf into the rack
1
Locate the left and right rails.
2
Using a Phillips screwdriver, remove the four screws from the front of the rail
and the two screws from the rear. Set the screws aside.
Installing a Primary Storage Shelf or an Expansion Storage Shelf
Hardware installation procedures
28
Advertisement
Table of Contents
Need help?
Do you have a question about the NetBackup 5330 and is the answer not in the manual?