Symantec NetBackup 5330 Hardware Installation Manual page 24

Note: If the IPMI is connected to a managed switch port, Symantec recommends
configuring the switch port to auto-negotiation.
If a firewall exists between the appliance and the remote devices that manage
■
an appliance (like a laptop computer), open the following ports:
22 SSH
80 HTTP
162 SNMP
443 HTTPS
623 KVM
5120 RMM ISO/CD
5123 RMM floppy
5124 CD
5127 SSL
5900 KVM CLI
7578 RMM CLI
7582 SSL
Note: If you have a private internal network, remember to configure the settings
accordingly in your network address translation (NAT).
The remote management port must be configured as a DHCP or static address.
■
Hardware pre-installation requirements
Prerequisites for IPMI configuration
24