Attaching Power Supply And Powering On - MakerBot Replicator 2 User Manual

ATTACHING POWER SUPPLY AND POWERING ON

Powering On the MakerBot Replicator 2
10
10a. Plug the AC power cord into an
electrical outlet.
10b. Set the power switch to the ON position.
10c. The MakerBot Replicator 2 will display
welcome text on the LCD panel. This is the
beginning of the startup script that will
guide you through initial calibration and
your first build.
CAUTION: Do not use an extension cord or power
supply other than the ones shipped with your MakerBot
Replicator 2. Ensure that the plug is easily accessible in
case the Replicator 2 needs to be disconnected.
B SETTING UP YOUR MAKERBOT REPLICATOR 2 DESKTOP 3D PRINTER
MB2020_REP2_UserManual_V4.indd 17
Machines-3D
Machines-3D
Machines-3D
17
7/22/13 5:32 PM