Setting Procedure With The Sysmac Studio - Omron CJ1W-ECT21 Operation Manual

3 Data Exchange with the CPU Unit
3-4-2

Setting Procedure with the Sysmac Studio

This section provides the setting procedure of the I/O Communication Area Setting Table with the Sys-
mac Studio.
1
Register the EtherCAT Slave Unit in the Unit configuration in Configurations and Setup -
CPU/Expansion Racks.
Double-click the EtherCAT Slave Unit or right-click the EtherCAT Slave Unit and select Edit
Special Unit Settings from the menu.
Refer to the Sysmac Studio Version 1 Operation Manual (Cat. No. W504).
The Edit Special Unit Settings Tab Page will be displayed.
3 - 32
CJ-series EtherCAT Slave Units Operation Manual for NJ-series CPU Unit (W542)