Changing The Master Code - Jungheinrich EJE C20 Operating Instructions Manual

Z
Requirements
Procedure
When you enter the valid master code the LED
(75) flashes green.
The LEDs (71,75) flash green.
The LEDs (72,75) flash green.
Z
The LEDs (73,75) flash green.
Wait until the LED (75) flashes green. The setting is saved.
The truck is switched off and the LED (75) is lit red.
When you enter the valid master code the LED (75) flashes green.
The truck is switched off and the LED (75) is lit red.