Advertisement
2 Scope of delivery
EOB-A01
1. Tripod
2. Fastening screws
3. Turning knobs for assembly display unit
4.
Support screw
3 Assembly EOB-A01
3.1 Assemble the tripod to the balance
Example:
(
Figure approximately)
EOB-A01-A01N-IA-e-1310
EOB-A01N
1. Tripod
2. Fastening screws
3. Turning knobs for assembly display unit
4. Support screw (already assembled)
5. Rubber cover
Fasten the tripod acc. to illustration with
the 4 screws on the lower side of the
platform.
Observe that during screwing
down not too much pressure is performed
on the weighing pan.
3
Advertisement
