Fan Without Light Kit; Operating Your Fan 10 - HAMPTON BAY Minuet III Owner's Manual

Fan without Light Kit

(Optional)
1. Disassemble the switch housing cover
from the light kit, you can keep the
light kit for future use.
2. Attach the plastic plug to the switch
housing. (Fig. 16)
3. Install the switch housing cover to the
switch housing with screws provided.
Switch
housing
Switch
housing
cover
Figure 16
WAIT FOR FAN TO STOP BEFORE
CHANGING THE SETTING OF THE
Turn on the power and check the operation
of your fan. There are two pull chains
available in your fan:
1. 3-speed pull chain- it controls the fan
speed as follows: 1 pull- High, 2 pulls-
Medium, 3 pulls- Low, and 4 pulls- Off.
Speed settings for warm or cool weather
depend on factors such as the room size,
ceiling height, number of fans, and so on.
2. Light kit pull chain- it controls the light
kit in "ON" or "OFF".
The slide switch controls directions: forward
(switch down) or reverse (switch up).
W a r m w e a t h e r - ( C o u n t e r - C l o c k w i s e
direction) A downward airflow creates a
cooling effect.(Fig. 17) This allows you to
set your air conditioner on a higher setting
without affecting your comfort.
Screws
Cool weather-(Clockwise direction) An
upward airflow moves warm air off the
ceiling area.(Fig. 18) This allows you to set
your heating unit on a lower setting without
affecting your comfort.
Plastic plug
NOTE
SLIDE SWITCH.

Operating Your Fan 10.

Figure 17
Figure 18