Installing The Light Kit; Fan Without Light Kit - HAMPTON BAY 68” Enchantment Owner's Manual

Installing the Light Kit

NOTE
BEFORE STARTING INSTALLATION, DISCON-
NECT THE POWER BY TURNING OFF THE
CIRCUIT BREAKER OR REMOVING THE FUSE
AT FUSE BOX. TURNING POWER OFF USING
THE FAN SWITCH IS NOT SUFFICIENT TO
PREVENT ELECTRIC SHOCK.
1. While holding the light kit assembly under
your fan, snap together the wire connection
plugs.
2. Carefully push all wires back into the switch
housing, then install the light kit assembly onto
the mounting plate with 4 screws provided. Be
sure to tighten all screws. (Fig. 18)
3. With the power off, insert the 13 watts compact
fluorescent bulbs (included) into the light kit
sockets. (Fig. 18)
4. Place glass shade over the light kit and secure
it with the glass cap and decorative nut
provided. DO NOT OVER TIGHTEN. (Fig.
18)
5. Restore power and your light kit is ready for
operation.
NOTE
LIGHT BULBS HAVE NO WARRANTY; CAN BE
PURCHASED AT ANY HOME DEPOT STORE.
10
Wire Connection
Plugs
Light Kit
Assembly
Glass Shade
Glass Cap
Decorative Nut

Fan without Light Kit

(Optional)
1. Disassemble the switch housing from the light
kit, you can keep the light kit for future use.
2. Attach the plastic plug to the switch housing.
(Fig. 19)
3. Holding the switch housing under your fan,
snap together the wire connection plugs.
Install the switch housing to the mounting plate
4.
with screws provided. (Fig. 19)
Screws
Bulbs
Wire Connection
Plugs
Switch
Housing
Plug
Figure 18
Mounting Plate
Screws
Figure 19