Operating Your Fan; Fan Without Light Kit - HAMPTON BAY Gazebo 473-131 Manual

Fan without Light Kit

(Optional)
Your fan is designed with light kit, in case
you intend to install the fan without light kit,
attach the switch housing cover to the switch
housing with the screws provided. ( Fig.19) .
Switch
housing
Switch
housing
cover
Figure 19

11.Operating Your Fan

WAIT FOR FAN TO STOP BEFORE
CHANGING THE SETTING OF THE
Turn on the power and check the operation of
your fan.
speed as follows: 1 pull- High, 2 pulls-
Medium, 3 pulls- Low, and 4 pulls-Off.
Speed settings for warm or cool weather
depend on factors such as the room size,
ceiling height, number of fans, and so on.
The slide switch controls directions: forward
(switch down) or reverse (switch up).
Warm weather -
airflow creates a cooling effect as shown in
Screws
Figure 20. This allows you to set your air
conditioner on a higher setting without
affecting your comfort.
Cool weather - (Reverse) An upward airflow
moves warm air off the ceiling area as shown
in Figure 21. This allows you to set your
heating unit on a lower setting without
affecting your comfort.
NOTE
SLIDE SWITCH.
The pull chain controls the fan
(Forward) A downward
Figure 20
Figure 21