Wire
Connection
Plugs
Screws
Light Kit
Assembly
12
Fan without Light Kit
(Optional)
CAUTION
BEFORE STARTING INSTALLATION, DISCON-
NECT THE POWER BY TURNING OFF THE
CIRCUIT BREAKER OR REMOVING THE FUSE
AT FUSE BOX. TURNING POWER OFF USING
THE FAN SWITCH IS NOT SUFFICIENT TO
PREVENT ELECTRIC SHOCK.
1.
Holding the switch housing under your fan,
snap the wire connection plugs together .
Bulbs
Install the switch housing to the mounting
2.
plate with screws provided. (Fig. 23)
Lock
Ring
Glass Shade
Figure 22
Wire Connection
Plugs
Switch
Housing
Mounting
Plate
Screws
Figure 23