MF286R Let’s go Getting started with your device. ZTE CORPORATION NO. 55, Hi-tech Road South, Shenzhen, P.R.China Postcode: 518057 Confidential and Proprietary Information of ZTE CORPORATION 1...
Getting to Know Your Device External View NOTE: Please use the original external antenna if necessary. Indicators Indicator State Description Power is on and external power supply is Blue on working normally. POWER Power is off or external power supply is working abnormally.
Indicator State Description The device is connected to the 2G/3G network Green Blinking and data is being transferred. Green Solid The device is registered to the 2G/3G network. Signal level panel. Strength is from weak to Blue on strong. There is no signal or no (U)SIM card is inserted.
If you want to use the mobile network to connect to the Internet or use your home phone, you need to insert your (U)SIM card first. Starting Your Device CAUTION: Your device must be placed in a well-ventilated environment. Do not cover the device. Slide the on/off switch to start your device.
Wireless Connection If you want to use Wi-Fi to connect to your device, please refer to the following steps. 1. Make sure that the Wi-Fi works normally. Please check the WIFI indicator. 2. Use your normal Wi-Fi application on the client to search for the available wireless network. NOTE: Please set the client to obtain an IP address automatically, and the client will get an IP address like “192.168.0.101”.
Begin to enjoy your Internet service. Telephone Function Your device supports the telephone function. Before using the telephone function, connect the telephone and insert the (U)SIM card. To make a call: 1. Pick up the handset. 2. Key in the telephone number. Press the # key on the telephone to send the call, or wait 4~8 seconds for the call to be dialed automatically.
Troubleshooting Voice Related Problems Symptoms Possible Problems/ Solutions There is no dial tone. Please wait for 1~2 minutes after the router is turned If signal strength is weak, you have no good RF reception. Change the location of the router. There is a prompt / phone alert / announcement as soon as Make sure your (U)SIM card is inserted correctly and I lift the phone off the hook.
Symptoms Possible Problems/ Solutions label on the device. Please check the label on the device to get the default username and password of the Claro 4GMax page. If you changed the password and forgot the new password, you need to restore the device to the factory default settings.
Do not use your router in dangerous environments such as oil terminals or chemical factories where there are explosive gases or explosive products being processed. Please use original accessories or accessories that are authorized by ZTE. Unauthorized accessories may affect the router performance, damage the router or cause danger to you.
Any other cause beyond the range of normal usage intended for the Product. End User shall have no right to reject or return the Product, or receive a refund for the Product from ZTE under the above-mentioned situations.
FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: SRQ-MF286R.