Dexcom G6 User Manual page 81

Receiver Notification
Receiver
Signal Loss Alert
The Signal Loss Alert tells you when you're not getting readings. Your display device may be too far from your transmitter or there may be
something, such as a wall or water, between your transmitter and your display device. You can fix this by moving your display device closer
to your transmitter. During signal loss, use your meter to check your glucose and make any treatment decisions.
You choose how long to wait before you get the alert — 20 to 200 minutes. When the display device and transmitter connect after a signal
loss or similar issue, up to 3 hours of missed readings can fill in on the graph.
Apple: Unlike other alerts, Signal Loss can't make a sound or vibrate if your smart device is Silenced or in Do Not Disturb mode.
What you hear, feel, and see
• Initial alert: Vibrates once
• Until confirmed: Vibrates and beeps once every 5 minutes
• All other system alerts also vibrate and beep once
App Notification
LBL014003 Rev 001 Dexcom G6 User Guide 36