Pairing Tips; What's Covered And What's Coming - Dexcom G6 User Manual

6.7 Pairing Tips

Your transmitter and display device pair after you insert your sensor and attach your transmitter. (On the
Bluetooth
receiver, the symbol will blink while it is trying to pair with the transmitter.) It usually takes less than
10 minutes for your transmitter and display device to pair, but it can take up to 30 minutes. During this time:
• Make sure your transmitter and display device are within 20 feet of each other
• Remove barriers between them
If these errors display, your transmitter and display device are not communicating.
App Notification
App
Receiver
Verify display device and transmitter are within 20 feet of each other without obstruction.
Wait up to 30 minutes.
Tap Help for more information.
Don't calibrate. Use meter for BG reading.
More than 30 minutes? Contact Technical Support (available 24/7) at:
• TechSupport@dexcom.com
• Toll free: 1.888.738.3646
• Toll: 1.858.200.0200
You won't get alarm/alerts or readings until error is fixed.

6.8 What's Covered and What's Coming

Now You Can:
• Prepare for sensor insertion
• Insert your sensor
• Attach transmitter to sensor
• Identify when transmitter and display device pair
• Start sensor warmup
LBL014003 Rev 001 Dexcom G6 User Guide 43