Dexcom G6 User Manual page 166

receiver are within 20 feet of each other.
Each charge lasts approximately 2 days. If your receiver battery was drained prior to charging, then after
charging you may need to reset its time and date. If this is required, the system tells you to reset and takes you
to the applicable screens.
Receiver: Charging Battery
1
Tap OK.
Receiver: Charging Battery
2
Plug Micro USB cable into Micro USB port and wall charger. Plug wall charger into electrical outlet.
Receiver: Charging Battery
3
Light in upper right corner goes on when charging.
When you plug in the receiver to charge, the Speaker Test screen displays. See Chapter 14 for more
information. Tap Skip Test to return to the Home screen.
Keep charging until home screen displays battery icon filled in.
LBL014003 Rev 001 Dexcom G6 User Guide 11