Good Read: When To Indicate - Datalogic Magellan 3200VSI Reference Manual

Good Read: When to Indicate

This feature specifies when the scanner will provide indication (beep and/or
flash its green LED) upon successfully reading a bar code. Choices are:
• Good Read = Indicate after decode
• Good Read = Indicate after transmit
• Good Read = Indicate after CTS goes inactive, then activ
NOTE
After Decode
DEFAULT
³
After CTS goes inactive, then active
Product Reference Guide
This option (Indicate after CTS goes inactive, then active), which uses CTS, is
only valid for RS-232 interfaces.
Enter/Exit Programming Mode
e
After Transmit
27