Enter/Exit Programming Mode
Transmit Function Characters
Enables/disables transmission of Code 128 function characters 1, 2, 3, and 4.
Function codes are transmitted as follows:
•
•
•
•
Transmit Function Characters
Length Control
Fixed Length Decoding —
will decode a bar code if the label length matches one of the configurable fixed
lengths.
Variable Length Decoding —
ner will decode a bar code if the label length falls in the range of the configu-
rable Length 1 and Length 2 values.
Fixed Length Decoding
110
FNC1 = 80 hex
FNC2 = 81 hex
FNC3 = 82 hex
FNC4 = 83 hex
When fixed length decoding is enabled, the scanner
Don't Transmit Function Characters
When variable length decoding is enabled, the scan-
Variable Length Decoding
Code 128
DEFAULT
DEFAULT
Magellan™ 3200VSI