RS-232 Interface Features
ACK NAK Options
This enables/disables the ability of the scanner to support the RS-232 ACK/
NAK protocol. When configured, the scanner and/or host sends an "ACK" when
it receives data properly, and sends "NAK" when the data is in error. Selections
for this option are:
•
•
•
•
Enable ACK NAK for Transmission
Enable ACK NAK for transmission and host command
Product Reference Guide
Disable
Enable for label transmission — the scanner expects an ACK/NAK
response from the host when a label is sent
Enable for host-command acknowledge — the scanner will respond with
ACK/NAK when the host sends a command
Enable for label transmission and host-command acknowledge
Enter/Exit Programming Mode
Disable ACK NAK
DEFAULT
Enable ACK NAK for host command acknowledge
53