Length Control; Configuring Variable Length Decoding - Datalogic Magellan 3200VSI Reference Manual

Figure 4. Label ID Position

Length Control

Fixed Length Decoding —
will decode a bar code if the label length matches one of the configurable fixed
lengths.
Variable Length Decoding —
ner will decode a bar code if the label length falls in the range of the configu-
rable minimum and maximum length.
Configuring Fixed Length Decoding:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the Fixed Length Decoding bar code for the desired symbology.
3. Scan the Enter/Exit Programming Mode bar code.
4. Set Length 1 to the first fixed length by following the
Programming Instructions
5. Set Length 2 to the second fixed length (or to '00' if there is only one fixed
length) by following the
below.

Configuring Variable Length Decoding:

1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the Variable Length Decoding bar code for the desired symbology.
3. Scan the Enter/Exit Programming Mode bar code.
4. Set Length 1 to the first variable length by following the
2 Programming Instructions
5. Set Length 2 to the second variable length by following the
Length 2 Programming Instructions
Product Reference Guide
Options
Prefix Label ID Aim ID
When fixed length decoding is enabled, the scanner
When variable length decoding is enabled, the scan-
below.
Length 1, Length 2 Programming Instructions
OR
Bar Code Data
below.
below.
Label ID Suffix
Length 1, Length 2
Length 1, Length
Length 1,
147