Enter/Exit Programming Mode
QR Code Length Control
Fixed Length Decoding —
will decode a bar code if the label length matches one of the configurable fixed
lengths.
Variable Length Decoding —
ner will decode a bar code if the label length falls in the range of the configu-
rable Length 1 and Length 2 values.
Configuring Fixed Length Decoding:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the Fixed Length Decoding bar code.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
4. Set Length 1 to the first fixed length by following the Length 1, Length 2
5. Set Length 2 to the second fixed length (or to '0000' if there is only one
Configuring Variable Length Decoding:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the Variable Length Decoding bar code.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
4. Set Length 1 to the minimum length by following the
5. Set Length 2 to the maximum length by following the
Fixed Length Decoding
134
When fixed length decoding is enabled, the scanner
gramming Mode bar code.
Programming Instructions below.
fixed length) by following the
Instructions
below.
gramming Mode bar code.
Length 2 Programming Instructions
Length 2 Programming Instructions
When variable length decoding is enabled, the scan-
QR Code Length 1, Length 2 Programming
below.
below.
Variable Length Decoding
QR Code
QR Code Length 1,
QR Code Length 1,
DEFAULT
Magellan™ 3200VSI