Qr Code Length 1, Length 2 Programming Instructions - Datalogic Magellan 3200VSI Reference Manual

QR Code

QR Code Length 1, Length 2 Programming Instructions

1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the Set Length 1 or Set Length 2 bar code.
3. Turn to
Complete the programming sequence by scanning the Enter/Exit Programming
Mode bar code.
DEFAULT SETTING FOR THIS FEATURE: 0001
Set Length 2
Product Reference Guide
Appendix C,
the length.
For 2d Code labels, only the data characters are included in the length
calculations.
Any value set higher than 2710 will be considered to be 2710.
NOTE
and scan the four digits (zero-padded) representing
DEFAULT SETTING FOR THIS FEATURE: 2710
Enter/Exit Programming Mode
Set Length 1
135