Global Prefix/Suffix - Datalogic Magellan 3200VSI Reference Manual

Enter/Exit Programming Mode

Global Prefix/Suffix

Up to 20 ASCII characters may be added as a prefix (in a position before the bar
code data) and/or as a suffix (in a position following the bar code data).
Sets up to 20 characters each from the set of ASCII characters or any hex value from 00 to FF. To configure this fea-
ture, scan the "Enter/Exit Programming Mode" bar code above to place the unit in Programming Mode, then the "Set
Prefix" or "Set Suffix," followed by the digits from the Alphanumeric table in
desired character(s). Reference the section,
programming mode by scanning the "Enter/Exit Programming Mode" bar code again (scan "Enter/Exit Programming
Mode" twice if less than 20 characters have been selected).
Set Suffix
74
"Example: Setting a Prefix"
DEFAULT SETTING PREFIX: 00 (None)
DEFAULT SETTING SUFFIX: 0D (CR)
Global Prefix/Suffix
Appendix C,
representing your
on page 145, for more information. Exit
Set Prefix
Magellan™ 3200VSI