Enter/Exit Programming Mode
QR Code Length 1, Length 2 Programming Instructions
1. Scan the START bar code.
2. Scan either the Set Length 1 or Set Length 2 bar code.
3. Turn to
NOTE
Scan the END bar code.
03DA(CR)
DEFAULT SETTING FOR THIS FEATURE: 0001
Set Length 2
Micro QR Code
Disable/Enable Micro QR Code
When disabled, the scanner will not read Micro QR Code labels.
042800(CR)
Enable Micro QR Code
NOTE
124
Alphanumeric Pad
senting the length.
For QR Code labels, only the data characters are included
in the length calculations.
Any value set higher than 2710 will be considered to be
2710.
Micro QR Code follows all of the QR Code configuration
settings for Length Control.
and scan the four digits (zero-padded) repre-
Set Length 1
DEFAULT SETTING FOR THIS FEATURE: 2710
Disable Micro QR Code
DEFAULT
2D Symbologies
03DB(CR)
042801(CR)
Magellan™ 800i Scanner