Fan Settings (Only For Menu "Pro") - Fasel Elektronik FCU2000 Operating Manual

10. Press the
11. Option "light ON after heat-up phase" is enabled. Cursor flashes on the selected
12. Press the
13. Exit the menu using the
14. Press the
15. Adjust the time for turn off delay. Digit flashes.
16. Press the
17. Exit the menu using the
18. Option "light OFF at drying" is enabled. Cursor flashes on the selected line.
19. Press the
20. Exit the menu using the
6.1.8

Fan settings (only for menu "Pro")

In this menu you can set the following:
1.
2.
Fig. 27: "Fan settings" view (example)
3.
4.
Operating manual Sauna control FCU2x00/FCU3x00/FCU4x00 Version V 2.09
key. The selected line is enabled.
line.
Press the key. Check mark is set (option selected).
Press the key: Check mark is deleted (option not selected).
key. The selection is saved.
key. The selected line is enabled.
Press the key: Reduce value.
Press the key: Increase value.
Press the key: Select left digit.
Press the key: Select right digit.
key. Selected value is accepted.
Press the key. Check mark is set (option selected).
Press the key: Check mark is deleted (option not selected).
key. The selected line is enabled.
The mode in which the fan is turned on.
Follow-up time of the fan, if the mode is completed.
Press (basic settings)
Press the key until you see the following view:







Press the key.
Following view is displayed:
key or select the next line with the
key or select the next line with the
key.
key. The lamp next to the key must light up.


"Basic settings" menu
or key.
or key.
37