Weekly Timer On/Off (Only For Fcu4Xxx); Program The Weekly Timer - Fasel Elektronik FCU2000 Operating Manual

"Basic settings" menu
10. Select desired weekday. Check mark flashes.
11. Press
12. Leave menu with
6.1.2

Weekly timer ON/OFF (only for FCU4xxx)

1.








Fig. 18: Weekly timer enabled. – Check mark not set (example)
2.
3.
4.
5.








Fig. 19: Start time (example)
6.1.3

Program the weekly timer

The timer appears only if the weekly timer is enabled.
32
Press -key: move cursor left.
Press -key: move cursor right.
-key. Selection is saved.
-key.
NOTE!
The timer cannot be activated by your service technician without
additional protective measures against fire hazards (e.g. protective
cover over the oven) and therefore can be disabled (the menu does not
appear). In the series FCU2x00 and FCU3x00 is no weekly timer.
Following view is displayed:
Press the key.
The following message is shown on the display: Please inspect the cabin and
check the steam inlet. Nothing must be positioned on the steam inlet.
Message will disappear automatically.
Following view is displayed if no valid start time is programmed. In that case, pro-
gramme a start time first.
Operating manual Sauna control FCU2x00/FCU3x00/FCU4x00 Version V 2.09
Not available with FCU2000 and
FCU3000
Not available with FCU2000 and
FCU3000