"Basic Settings" Menu; Basic Settings" - General; Time And Weekday - Fasel Elektronik FCU2000 Operating Manual

6

"Basic settings" menu

6.1

"Basic settings" - general

6.1.1

Time and Weekday

In this menu you can set the time and the weekday.
1.
2.
Fig. 16: View „Change values" (example)
3.
4.
Fig. 17: View „Change values – change mode" (example)
5.
6.
7.
8.
9.
Operating manual Sauna control FCU2x00/FCU3x00/FCU4x00 Version V 2.09
Press key (basic settings). The lamp next to the key must light. The weekday
appears only, if the weekly timer is released.
The following view is shown:







Press -key.
The following view is shown:







Select one of the following lines with the keys
– Time (→ point 7)
– Weekday (→ point 10) (only at FCU4xxx and if the weekly timer is enabled)
Press -key. Selected line is activated.
Set the desired time. Last digit flashes.
Press -key: reduce value.
Press -key: increase value.
Press -key: move cursor left.
Press -key: move cursor right.
Press -key. The selection is saved.
Exit the menu by using the
"Basic settings" menu




- or
-key or select the next line with the
:
or -key.


31