5.7 Adjust the cabin fan speed (not for FCU2xxx)
Fig. 9: "Fan speed" view (example)
1.
2.
3.
4.
5.
5.8
Options menu
5.8.1
RGB-LED brightness (only for FCU4xxx and menu "Pro")
In this menu you can set the brightness of the RGB-LEDs.
1.
Operating manual Sauna control FCU2x00/FCU3x00/FCU4x00 Version V 2.09
Select "Fan speed" setting. Either:
– Press
key to turn on the fan or
– From the main view "adjusting a mode", press the
brightness" is displayed.
Press the
key:
Value flashes.
Adjust the desired value:
Press the
key: Reduce value.
Press the
key: Increase value.
0: slow step
9: quick step
Press the
key. The adjusted value is accepted.
NOTE!
The "RGB-LED brightness" menu is only available for control devices
which are connected to a RGB-LED control from the company
Licht2000.
-Press the key until you see the following view:
key until the menu "Light
Not available with FCU2000 and
FCU3000!
Operation
25