Select Program (Only For Fcu4Xxx) - Fasel Elektronik FCU2000 Operating Manual

"Basic settings" menu
10. Press the
11. Select the next line with the
12. You can set the stop time (end) and the duration similar to the start time. If you
13. Press the
14. Select the next line with the
15. Select mode. Cursor flashes.
16. Press the
17. Select the next line with the
18. Select program no. Digit flashes.
19. Press the
20. Exit the menu using the
6.1.4

Select program (only for FCU4xxx)

In this menu you can select 1 of 8 programs.
1. Press key "basic settings". The lamp next to the key must light.
2. Press







Abb. 22: View "select program" (example)
3. Press
4. Select desired program with the keys
5. Confirm with key
34
Press the key: Move cursor to the right.
Here you set the time when the timer is started. If you change the start time, the du-
ration changes automatically.
key. The selection is saved.
change the end time, the duration changes automatically.
key. The selection is saved.
Select the mode with the
key. The selection is saved.
Press the key: Reduce value.
Press the key: Increase value.
key. The selection is saved.
Note!
For each mode there exist 8 programs which are freely adjustable. .
The program numbers are shown on the display. (These 8 freely ad-
justable programs may be locked by the service engineer.)
-key until the following view is shown:
-key
Operating manual Sauna control FCU2x00/FCU3x00/FCU4x00 Version V 2.09
or key.
or key.
or key.
or key.
key.
Not available with FCU2000 and
or.
FCU3000