Select Or Start The Mode; Adjust Modes - Fasel Elektronik FCU2000 Operating Manual

A mode is selected. The corresponding green lamp lights up.
1.
2.
5.2.3

Select or start the mode

Mode 1.
select or start
2.
3.
Key
Table: 5 Mode control keys
4.
5.3

Adjust modes

The control unit is turned on.
1.
2.
Operating manual Sauna control FCU2x00/FCU3x00/FCU4x00 Version V 2.09
Press the key of the selected mode. The green lamp next to the key flashes.
The green lamp of the selected mode flashes. Turn off the sauna control using the
"Control unit OFF" key. → See page 11, Fig. 2
Turn on sauna control according to chapter 5.2.1.
The green lamp of the last selected mode flashes.
Press the key for the desired mode.
If the green lamp of the selected mode flashes, press the key again. The desired
mode has been started only when the green lamp stops flashing.
NOTE!
There are two menu navigations available for the control unit. All the
menus are displayed only in the "Professional" menu. These menus are
indicated accordingly in this chapter. If these menus are not displayed,
your control has been set to the "Small" menu.
menu".
Furthermore, the control unit can be equipped with extension boards
like for e.g. for flover feeding. This requires additional menus, which are
indicated accordingly in this chapter. For information about the fittings of
your sauna control, please contact the installer or the dealer of your
sauna system.
Press the key (sauna mode),
mode) if required. The lamp next to the key must flash or light up.
Following view is displayed:
Description
Sauna mode
Sauna mode with humidity
(only FCUx200 and FCUx400)
Infrared mode
(only FCU3400 and FCU4400)
(Sauna with humidity mode) or
Operation
Also see "options
→
(infrared
19