Create Factory Default Image; Figure C-10: Press F3 To Boot Into Recovery Mode; Figure C-11: Recovery Tool Menu - IEI Technology AFL2-17A-H61 Series User Manual

C.2.5 Cre a te Fa c to ry De fa u lt Im a g e
NOTE:
Before creating the factory default image, please configure the system
to a factory default environment, including driver and application
installations.
To create a factory default image, please follow the steps below.
Turn on the system. When the following screen displays (Figure C-10), press
S te p 1:
the <F3> key to access the recovery tool. The message will display for 10
seconds, please press F3 before the system boots into the operating system.

Figure C-10: Press F3 to Boot into Recovery Mode

S te p 2: The recovery tool menu appears. Type <4> and press <Enter>. (Figure C-11)

Figure C-11: Recovery Tool Menu

S te p 3: The About Symantec Ghost window appears. Click OK button to continue.
P a g e 226
AFL2-17A/AB-H61 P a n e l P C