Table of Contents
Advertisement
|
SVO-9620 Features (Continued)
| Suggested
Configurations
1
wn
High-speed picture search
This VTR supports high-speed picture search with a search dial. Recognizable
color pictures at speeds ranging from 1/20 to 10 times normal speed are available
in search mode. This facility allows any desired point on the tape to be located
quickly. If you are using the SVRM-100 remote control unit (optional), color
pictures at speeds ranging from 1/20 to 10 times normal speed are also available.
Automatic control of video recording level
The automatic gain control (AGC) circuit maintains the proper video level to
assure optimum-quality video recording.
Timer recording and playback
By setting the TIMER selector to either REC or PLAY, the VTR records or plays
back when the power is automatically turned on.
Menu function
The menu function allows settings to be made easily by using the buttons on the
front panel.
Playback of dual color systems
This VTR can play back both PAL- and NTSC-recorded signals through SYSTEM
SELECT switch setting. The NTSC-recorded signals are played back based on the
NTSC:
system.
Auto head cleaner
Each time the VTR starts and ends playback/recording, a cleaning roller
automatically passes over the video/FM audio (rotary) heads, removing tape
residue and enabling preventive care of the tape heads.
Automatic cassette ejection at tape end
When a tape reaches its end, the VTR automatically ejects the cassette. This
prevents accidental erasure of valuable data. Automatic tape ejection can be
inhibited through menu operation.
The following configurations are suggested.
© Recording signals input from other video equipment
© Recording signals sent via a satellite
® Controlling the VTR using a simple editing control unit
| Recording Signals Input from Other Video Equipment
Connectors
External SYNC IN connector
The SYNC IN connector enables the VTR to be synchronized with other video
equipment.
8-pin VTR connector
The TV OUT connector allows the VTR to simultaneously monitor video and
audio signals by connecting an external monitor with a single cable.
Loop-through output
A video input signal, connected to one VIDEO IN connector, is directly output
from the other VIDEO IN connector. Pictures appear on the connected monitor,
therefore, with good resolution even during recording. Hence you can record
pictures while viewing them on the monitor.
1-4(E) | Chapter 1. SVO-9620 Introduction
The following configuration is suggested for recording video signals input from
other video equipment.
Video monitor
Audio signal
Video signal
SVO-9620
oooomBly
yy
@:
VTR etc.
P0000
09 LOT oo
Recorder
Recording signals input from other video equipment
Chapter
1 SVO-9620 Introduction
1-5(E)
HHUINUUHAUH
Advertisement
Table of Contents
