Connecting the VCR
Before you use your VCR for the first time, you need to connect it to your TV. This VCR
doesn't have a TV tuner. Therefore, to record TV programmes, connect equipment with a TV
tuner to the LINE IN jacks or EURO-AV connector.
This section explains how to hookup and set up your VCR so that you can start enjoying it
right away.
Before you get started
¢ Turn off the power to all equipment.
¢ Do not connect the mains lead until all of the connections are completed.
e Be sure you make connections firmly. Loose connections may cause picture distortion.
e If your TV doesn't match any of the examples provided, see your nearest Sony dealer or
qualified personnel.
Audio/video (A/V) hookup
If your TV has an S video input connector, you will get a better picture using the supplied S video cable. If not, use an
audio/video cable only.
TV, tuner, etc
5 video cable (supplied)
AUDIO L/R OUT
S VIDEO OUT
S video cable (supplied)
VIDEO OUT
Audio/video cable (not supplied)
EURO-AV hookup
If your TV has an S-EURO-AV (Scart) connector, you will get a better picture using this connection.
C-EURO-AV
GER)
or S-EURO-A'
(Scart)
C-EURO-AV
(LINE 1)
VMC-2121 EURO-AV cable (not supplied)
8 | Getting Started