Table of Contents
Advertisement
Connecting Example 1
To Connect a Combination VHF/UHF Antenna
"Fype
=
connector
_—_._ not
(optional) —
75-ohm coaxial
band separator — :
(mixer) (gptional)
f
1 Disconnect the TV antenna cable from the TV and
connect it to the VCR.
2 Connect the VCR and the TV.
TV with a single terminal for the VHF/UHF antenna
Connect directly using the supplied 75-ohm coaxial
cable.
TV with separate VHF/UHF antenna terminals
Use a U/V band separator.
How to attach the U/V band separator and the F-type
connector
See page 17.
Connecting Example 2
To Connect a VHF Antenna Only
!f the antenna cable is a
Hf the antenna cable is a
75-ohm coaxial (round)
300-ohm twin lead (flat)
type
type
F-type connector (optional)
|Antenna connector (supplied
VHF/UHF I N
1 Disconnect the TV antenna cable from the TV and
connect it to the VCR.
If the antenna cable is a 75-ohm coaxial (round) type
Use an F-type connector (optional)
If the antenna cable is a 300-ohm twin lead (flat) type
Use the antenna connector (supplied)
2 Connect the VHF/UHF OUT terminal on the VCR and
the VHF IN terminal on the TV with the 75-ohm coaxial
cable (supplied).
How to attach the antenna connector and an F-type
connector
See page 17.
13
Advertisement
Table of Contents
