Configuring Network Settings; Ip Address - Crestron DMPS3-4K-200-C Supplemental Manual

•
To exit the Setup Menu, do the following:
1. Press the MENU button until the Exit Setup Menu prompt appears on the LCD.
2. Press the soft button under the Yes option. The LCD returns to the main screen.

Configuring Network Settings

To configure network settings, do the following: On the Setup Menu, select Network Setup.
The Network Setup menu opens.

IP Address

Available selections are as follows:
IP Address
Subnet Mask
Def. Router
DHCP
Hostname
Domain Name
MAC Address
System ID
Each of the items on the Network Setup menu is discussed below.
IP Address
By default, DHCP (Dynamic Host Configuration Protocol) is enabled. To view the current IP
address or to set a static IP address, do the following:
NOTE:
information, refer to "DHCP" on page 5.
1. On the Network Setup menu, select IP Address. The current IP address appears
2. Using the appropriate soft button under each octet in the IP address, select an
3. Press ENTER to apply the IP address.
4 • DMPS3-4K-200-C/300-C Series: 4K Presentation Systems
To enter digits or uppercase and lowercase letters, turn the VOLUME control knob
clockwise or counterclockwise, or use the ▲ and ▼
desired character is displayed.
Exit Setup Menu?
Yes
Network Setup
▼
To be able to set a static IP address, DHCP must be set to Off. For additional
on the LCD.
IP Address
000. 000. 000. 000
If DHCP is set to Off, continue with step 2 to set a static IP address.
octet and then use the VOLUME control or the ▲ and ▼
setting appears in the octet.
No
Supplemental Guide – DOC. 7849B
until the
buttons as applicable
until the desired
buttons