Configuring Control Settings
To configure control settings, do the following: On the Setup Menu, select Control Setup.
The Control Setup menu opens.
Control Setup Menu
Backlight
Available selections are as follows:
Backlight
Password
Info
Messages
Time/Date
Front Panel
Each of the items on the Control Setup menu is discussed below.
Backlight
The backlight of the LCD can be changed. To change the backlight setting, do the
following:
1. On the Control Setup menu, select Backlight. A screen appears allowing the
2. Using the ▲ or ▼
3. Press ENTER to apply the selected setting. An asterisk precedes the selected
Password
To change the password, do the following:
1. On the Control Setup menu, select Password. A screen appears allowing the
2. Using the VOLUME control, enter the desired digits. To move the cursor to the right
3. Press ENTER to apply the password.
8 • DMPS3-4K-200-C/300-C Series: 4K Presentation Systems
Control Setup
▼
desired brightness to be set.
Select Brightness
Low
button
High. The default setting is Medium.
setting.
password to be changed.
Change Password:
_
The password can consist of up to five digits ranging from 0 to 9.
when entering the digits, press the ▲ button as appropriate. To move the cursor to
the left (if necessary), press the ▼
▼
, select one of the following options: Low, Medium, or
button.
Supplemental Guide – DOC. 7849B