Mac Address; System Id - Crestron DMPS3-4K-200-C Supplemental Manual

3. Enter the desired domain name by doing any of the following:

MAC Address

The LCD displays the MAC address. To view the MAC address, do the following: On the
Network Setup menu, select MAC Address. A screen appears displaying the MAC address
as shown in the sample below.

System ID

NOTE:
recommended that the system ID always be changed to a number other than 1.
NOTE:
to the DM 8G+ input or DM 8G+ output of another DMPS3 series or DM-MD series
switcher.
To set a unique system ID, do the following:
1. On the Network Setup menu, select System ID:
2. Press ENTER to set a unique system ID number. A screen appears allowing the
3. Using the
4. Press ENTER to apply the system ID number.
Supplemental Guide – DOC. 7849B
• To enter digits and uppercase and lowercase letters, use the ▲ and ▼
•
To move the cursor to the left, press the soft button under the < symbol.
•
To move the cursor to the right, press the soft button under the > symbol.
• To delete a character, position the cursor under the character to be deleted
and then press the soft button under DEL.
•
To insert a space, position the cursor where the space is to be inserted and
then press the soft button under INS.
MAC Address
00:10:7f:8b:1e:9c
System ID numbers range from 1 to 64. The default system ID number is 1. It is
A unique system ID must be assigned to the device whenever the device connects
The current system ID number appears on the display.
Network Setup
System ID: 1
system ID to be changed.
Set System ID
1
or button, select a unique system ID number.
 
DMPS3-4K-200-C/300-C Series: 4K Presentation Systems • 7
x
(x is the current ID number).
▲
.
buttons