Time/Date - Crestron DMPS3-4K-200-C Supplemental Manual

Time/Date

To set a time and date, do the following:
1. On the Control Setup menu, select Time/Date. A screen appears displaying a date
2. To set the date, do the following:
3. To set the time, do the following:
10 • DMPS3-4K-200-C/300-C Series: 4K Presentation Systems
and time.
12/19/16 10:38:07AM
DATE TIME
a. Press the soft button under DATE. A screen appears displaying a date.
DATE: 12/19/2016
MO DAY YR
b. Do the following:
i. To set the month, press the soft button under MO. Brackets enclose the
month that is displayed. Use the ▲
month.
ii. To set the day, press the soft button under DAY. Brackets enclose the
day that is displayed. Use the ▲
iii. To set the year, press the soft button under YR. Brackets enclose the
year that is displayed. Use the ▲
iv. Press ENTER to apply the settings.
a. Press the soft button under TIME. A screen appears displaying the time.
TIME: 10/38/07AM
HR MIN
b. Do the following:
i. To set the hour, press the soft button under HR. Brackets enclose the
hour that is displayed. Use the ▲
ii. To set the minutes, press the soft button under MIN. Brackets enclose
the minutes that are displayed. Use the ▲
desired minutes.
iii. To set either AM or PM, press the soft button under AM/PM. Brackets
enclose AM or PM. Use the ▲
iv. Press ENTER to apply the settings.
▼ button to select the desired
or
▼ button to select the desired day.
or
▼ button to select the desired year.
or
AM/PM
▼ button to select the desired hour.
or
▼ button to select AM or PM.
or
Supplemental Guide – DOC. 7849B
▼ button to select the
or