Using the Routing Push Buttons
The DMPS3-4K-200-C/DMPS3-4K-300-C Series provides routing push buttons that can be
used to route inputs to outputs. Routing LEDs indicate the routing status.
NOTE:
effect (refer to "Front Panel" on page 11).
The following sections provide information about the routing push buttons on the
DMPS3-4K-200-C/DMPS3-4K-300-C Series and about using the push buttons to route an
input to outputs. Information about viewing routing status is also provided.
DMPS3-4K-200-C Routing Push Buttons
The DMPS3-4K-200-C provides a ROUTE push button, a VIEW push button, seven INPUT
push buttons, five OUTPUT push buttons, and corresponding LEDs as shown in the
illustration below.
DMPS3-4K-200-C Routing Push Buttons and LEDs
The INPUT push buttons consist of the following:
•
•
The OUTPUT push buttons consist of the following:
•
•
•
12 • DMPS3-4K-200-C/300-C Series: 4K Presentation Systems
If the front panel controls are disabled, pressing the routing push buttons has no
Six HDMI push buttons numbered 1–6
One DM push button numbered 7
One HDMI push button numbered 1
One DM push button numbered 2
Three LOCAL AUDIO push buttons labeled PROG, AUX 1, and AUX 2
Supplemental Guide – DOC. 7849B