Troubleshooting, Safety And Maintenance | 31; Routine Care - Minelab MF5 Operation Manual

Routine Care

The MF5 is designed for prolonged use in harsh operating environments
provided proper care and maintenance is conducted.
The following should be observed:
• Do not use solvents or chemicals to clean the MF5. If any part of the detector comes into contact
with corrosive substances, wash the detector with clean fresh water and dry with a clean cloth.
• During rest periods, wherever possible, the detector should be sheltered from direct sun, rain,
snow, etc.
• Before collapsing the shafts, fully extend each shaft and remove any dirt or dust with a damp cloth.
• Ensure the MF5 is dry before stowing in the Carry Bag.
• Ensure the batteries are removed from the Battery Compartment before stowing the detector.
• Check Earset and Test Piece are properly stowed.

Troubleshooting, Safety and Maintenance | 31