Backlight Adjust - Minelab GPX6000 User Manual

Controls
1. Bluetooth Control
Enables Bluetooth for connection of wireless
headphones (page 6)�
Long-press (> 2�5 s) to enable Bluetooth pairing for
connecting Bluetooth headphones

2. Backlight Adjust

Cycles through the backlight brightness settings — high,
medium, low and off�
3. Power On/Off
Turns the detector on and off�
Restores factory default settings
(Press and hold from off, > 7 s)
4. Sensitivity Adjust
Adjusts the Sensitivity Level
CONTENTS
1
2
3
(page 6)�
(page 3)�
(page 8)�
4
5. Ground Type
Toggles between Difficult and Normal Ground Type
6. Noise Cancel
Initiates the Noise Cancel process
Toggles between the Double-D Modes
EMI Cancel and Conductive Ground Cancel�
(Long-press, > 2�5 s)
7. Volume Adjust
Adjusts the audio Volume Level�
8. Quick-Trak Trigger
Press and hold during Quick-Trak Ground
Balance (page 9)�
4
7
6
5
8
(page
(page 13)�
(page 10) —
9)�